• Free Next Day Delivery

    On selected products ordered before 3pm

  • Click and Collect

    Available within one hour on selected products

  • Best Prices

    We'll Beat any Online Trade Prices

  • Fast & Free Technical Advice

    For technical advice call 07583672586

SAYERLACK TL0339/00 CLEAR HIGH GLOSS ACRYLIC LACQUER

SAYERLACK TL0339/00 CLEAR HIGH GLOSS ACRYLIC LACQUER

Clear High Gloss Acrylic Lacquer with Excellent Flow and Transparency

Product Ref: TL0339/00-5  |  Brand: Sayerlack

£78.30 inc. VAT RRP £82.39

  • OUT OF STOCK. AVAILABLE TO ORDER

Overview

Sayerlack TLL339 is a high gloss interior use Acrylic Topcoat, with excellent flow and transparency. It has been designed for yellowing resistance on bleached and light timbers such as Ash, Beech and Maple. It is a highly versatile lacquer with good transparency, smoothness and build. It is ideal over clear Acrylic Basecoats such as TU0055/00. Burnishing is possible three days after application. Activation with TH0784/00 and thinning with DT0424/00.

FEATURES

  • Ultra-high gloss
  • High Build
  • Yellowing Resistance
  • Scratch Resistant

Mixing Procedure:

Part A

Part B

Thinner

Weight (Kg)

TL0339/00 100

TH0784/00 100

DT0424/00 10 - 40

Application:

Conventional Spray with 1.8mm Tip, Air Mix Spray, Airless Spray or Curtain Coater

Coverage:

80 - 180g/m²

Number of Coats:

1

Drying Times @ 20°C

Dust Free

Touch Dry

Stackable

 

45 Minutes

2 Hours

24 Hours

Pot Life:

2 Hours

Technical Info

Solids:

50 ± 1

Gravity (kg/l):

0,980 ± 0,030

Viscosity @ 20°C:

70” ± 4” (DIN 4)

VOC Content:

492 g/l

Usage

PREPARATION

Prior coat of wax polyester basecoat or wax free polyester. Please see Polyester coatings for details.

APPLICATION

With good drying conditions and air circulation (20°C), a good build can be achieved with one coats of 180 g/m². Lower temperatures and higher relative humidity can lead to longer drying times.

AFTER CARE

Buffing is possible 3 days after application.

Due to the high chemical resistance of Acrylic Topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or Pluriball are not suitable.

ALTERNATIVE HARDENERS/THINNERS

OTHER

In case light coats are applied, use thinner DT0441/00. It is possible to substitute TH0790/00 to TH0784/00. If this is the case, apply at a temperature of no lower than 18°C. At lower temperatures drying may not be uniform and the film is liable to lose elasticity and become brittle.

It is important to understand when using a Acrylic Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.

Wish List

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

WE'RE NOW OFFICALLY OPEN!

‚Äč