• Free Next Day Delivery

    On selected products ordered before 3pm

  • Click and Collect

    Available within one hour on selected products

  • Best Prices

    We'll Beat any Online Trade Prices

  • Fast & Free Technical Advice

    For technical advice call 07583672586

SAYERLACK TL0345/00 CLEAR HIGH GLOSS POLYURETHANE LACQUER

SAYERLACK TL0345/00 CLEAR HIGH GLOSS POLYURETHANE LACQUER

Clear Wet Look PU Thixotropic Lacquer with Excellent Flow

Product Ref: TL0345/00  |  Brand: Sayerlack

£345.00 inc. VAT

  • Estimated delivery within 5-7 days
    Please note: Delivery times provided are estimates and not guaranteed. If delivery is expected to take longer than 10 working days after placing your order, one of the team will attempt to contact you. For more detailed delivery times, please contact the office on 03333 208 583.

Overview

Sayerlack TL345 is a high gloss interior use Polyurethane Topcoat, with excellent flow and transparency. It has been designed for scratch resistance on table tops and is a highly versatile lacquer, fast drying for frames and panels. It is ideal over clear Polyurethane Basecoats such as TU0001/00. Burnishing is possible three days after application. Activation with TH0738/00 and thinning with DT0424/00.

FEATURES

  • Ultra-high gloss
  • High Build
  • Yellowing Resistance
  • Scratch Resistant

Mixing Procedure:

Part A

Part B

Thinner

Weight (Kg)

TL0345/00 100

TH0738/00 50

DT0424/00 20 - 40

Application:

Conventional Spray with 1.8mm Tip, Air Mix Spray, Airless Spray or Curtain Coater

Coverage:

80 - 200g/m²

Number of Coats:

1

Drying Times @ 20°C

Dust Free

Touch Dry

Stackable

 

15 Minutes

60 Minutes

15 Hours

Pot Life:

4 Hours

Technical Info

Solids:

55 ± 1

Gravity (kg/l):

0,990 ± 0,030

Viscosity @ 20°C:

50” ± 5” (DIN 4)

VOC Content:

492 g/l

Usage

PREPARATION

Prior coat of wax polyester basecoat or wax free polyester. Please see Polyester coatings for details.

APPLICATION

With good drying conditions and air circulation (20°C), a good build can be achieved with one coats of 180 g/m². Lower temperatures and higher relative humidity can lead to longer drying times.

AFTER CARE

Due to the high chemical resistance of Polyurethane Topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or Pluriball are not suitable.

ALTERNATIVE HARDENERS/THINNERS

TH0721/00 @ 50 – 100% for Higher gloss, better build and slower drying.

TH0735/00 @ 50 – 100% for Better non-yellowing.

TH0724/00 @ 100% for Faster dying at the expense of build.

TH0733/00 @ 100% for Hard surface, high build

OTHER

It is important to understand when using a Polyurethane Coating to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.

Wish List

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

Website Under Maintenance

Website Under Maintenance

Our website is currently under maintenance but our team are still here for you. For up to date pricing and customer support, please get in touch.

Contact Us