• Free Next Day Delivery

    On selected products ordered before 3pm

  • Click and Collect

    Available within one hour on selected products

  • Best Prices

    We'll Beat any Online Trade Prices

  • Fast & Free Technical Advice

    For technical advice call 07583672586

SAYERLACK TU0202/22 BLACK PU PRIMER

SAYERLACK TU0202/22 BLACK PU PRIMER

Black Polyurethane Basecoat. Ideal for Frames

Product Ref: TU0202/22-6  |  Brand: Sayerlack

£47.94 inc. VAT RRP £54.49

  • IN STOCK

Overview

If you are looking for an extremely fast drying, general purpose Black Two-Pack Polyurethane Primer, TU0202/22 is for you. It is high build, has excellent application, extremely fast curing and stacking properties for use on fibreboard and solid wood. It is perfect for frames. Manufactured with milled black pigment it demonstrates amazing covering power compared to tinted basecoats. Apply by spray gun or curtain coating. Activation with TH0727/00 and thinning with DT1150/00.

FEATURES

  • Fast Drying
  • Perfect under Dark Colours
  • Good hiding power on sharp edges
  • Contains a high % of black pigment

Mixing Procedure:

Part A

Part B

Thinner

Weight (Kg)

TU0202/22 100

TH0780/00 50

DT1150/00 20

Application:

Conventional Spray with 1.8mm Tip, Air Mix Spray, Airless Spray or Curtain Coater

Coverage:

100 - 200g/m²

Number of Coats:

Maximum 2

Drying Times @ 20°C

Dust Free

Touch Dry

Stackable

 

10 Minutes

30 Minutes

4 Hours

Sanding:

Minimum 12 Hours

Overcoating:

Minimum 12 Hours with PU Topcoats

Pot Life:

90 Minutes

Technical Info

Solids:

65 ± 2

Gravity (kg/l):

1,360 ± 0,030

Viscosity @ 20°C:

20” ± 3” (DIN 8)

VOC Content:

422 g/l

Usage

PREPARATION

For best results, we suggest preparing the surface using 240-320 grit stearate abrasives as they provide a higher efficiency than conventional. Ensure the surface is completely clean of dust and debris before coating.

APPLICATION

With good drying conditions and air circulation (20°C), a good build can be achieved with three coats of 200 g/m² with an interval of 50 minutes in between. Under these circumstances, the substrate can be sanded after 12 hours. Lower temperatures and higher relative humidity can lead to longer drying times, but it is possible to speed up drying using heated ovens.

AFTER CARE

Sayerlack TU0202/22 Black PU Primer can be over coated with any pigmented PU Topcoats such as Sayerlack TZ99**/XX.

ALTERNATIVE HARDENERS/THINNERS

Sayerlack TH0711/00 @ 50% for improved pore wetting

OTHER

It is important to understand when using a Polyurethane Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.

Wish List

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

WAGNER SPECIAL OFFER PUMP

‚Äč