SAYERLACK XA4080/00 Waterbased Crosslinker
- £115.14RRP £113.20
Quick Drying, High Solids and Available in any Colour and Sheen
Product Ref: AT9905/BB-5 | Brand: Sayerlack
Prices Range From £62.34 - £250.50£62.34 inc. VAT RRP £70.50
Beautiful stylish results are important when coating furniture. The Sayerlack Ultra-fresh waterbased range can be used to produce finishes that are indistinguishable in quality, strength and chemical resistance as two-pack polyurethane finishes. Sayerlack is at the forefront of waterbased technology that is conscientious about the wellbeing of people and the environment. AT99 is a one-pack waterborne, topcoat designed for interior joinery ensuring beautiful vibrant colours, good hardness, chemical resistance and smoothness to the touch.
This product is particularly suitable for spraying interior wooden components where durability, good even matting and good chemical resistance is required. It's the ideal product for kitchen doors, flat parts, turned parts, picture frames and matchboards. It can be sprayed using a conventional gun, airmix system, airless spray system and electrostatic gun. It comes ready to use and can be thinned using 5% water if necessary. AT99 can be used as it is, however further chemical resistance can be achieved with 1% XA4080/00 Crosslinker.
|Conventional Spray, Air Mix Spray, Airless Spray, Electrostatic Spray|
|Number of Coats:|
|Drying Times @ 20°C|
39 ± 2
1,150 ± 0,030
Viscosity @ 20°C:
210 ± 10 (DIN 4)
For best results, we suggest priming the surface with two to three coats of Sayerlack AU047400 Waterbased White Primer. Once fully cured denib the surface using 240-320 grit stearate abrasives. They provide a higher efficiency than conventional abrasives. Ensure the surface is completely clean of dust and debris before coating.
AT99 is a fully pigmented system that can be tinted to any colour shade desired. With good drying conditions and air circulation (20°C), achieve a good build with one coats of 120-140 g/m². Under these circumstances, the substrate can stacked in 24 hours. Lower temperatures and higher relative humidity can lead to longer drying times, but it is possible to speed up drying using heated ovens.
Due to the high chemical resistance of Waterbased Topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or Pluriball are not suitable.
Sayerlack XA4095/00 @ 3% for greater chemical resistance.
It is important to understand when using a Waterbased Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.
Following the latest Government announcement, we wanted to let you know thatwe remain open for business as usual during the new lockdown. You can rest assured, we are holding large stocks of the majority of products to supply your requirements through this crisis and rise to the ever-changing challenges ahead.
As always the wellbeing of our customers, suppliers and colleagues is our number one priority, and we have ensured our site is COVID safe workplace.
We would like to thank you for your help and understanding during this challenging period and sincerely wish that the impact on our customers, their families and their businesses, is minimal.
Please do not hesitate to contact us for further information and support if you have any questions or concerns