SIA 1944 SIAONE 150MM DISCS

Overview

Sanding is a must-do in any paint or coating project. It is essential for giving your work an amazing smooth finish. To make sanding faster and effortless, we recommend power tools over manual sanding. Random Orbital Sanding is highly recommended for aggressive sanding due to its proclivity for removing a lot of material.

Choosing the correct abrasive for the job is also important.

S Performance: cleaner, safer and more efficient thanks to a new hole pattern. Optimised air flows guarantee maximum extraction performance of the multi-hole sanding discs in the new S Performance range from sia Abrasives. Sanding dust is extracted more efficiently and the lifetime is increased. In addition, the hole design reduces dust emissions.

1944 siaone combines the quality with aggressive cut and optimum lifetime. For price-conscious users for working with various materials, for example: bodyfiller, primer filler, varnish, paint and wood.

Advantages

Aggressive initial sanding thanks to optimised sanding grain

Process stability thanks to uniform scratch depths in all grits

Excellent price/performance ratio

Applications

Sanding off coatings and impurities

Sanding out unevenness at the edges of repaired surfaces

Flatting bodyfiller and primer filler

Fine sanding primer filler

Keying old and new lacquers

Materials

Colour

Primer filler

Putty

Paints

Old lacquer

Primer coat

Epoxy primer coat

Cathodic dip primer coat

Plastics

Acrylic glas

Gelcoat polyester

Glass-fibre reinforced plastic (GRP)

Composite

Technical Info

Usage

PREPARATION

Ensure you have the correct PPE for sanding. We recommend disposable FFP2 Face Masks, as they provide optimum protection from airborne particles such as dust, mist and fumes. FFP2 Masks are suitable for plastering and sanding. Wear eye protections such as safety glasses and goggles to prevent flying debris from sanding. Wear Safety Gloves when using power tools such as sanders and grinders.

Ensure you have the correct backing pad and/or disc saver for the siaone sanding disc.

APPLICATION

1944 siaone discs are hook and loop and have abrasive-material backing similar to Velcro. The backing pads have microscopic hooks on their surface, while the hook and loop discs have corresponding tiny loops on their backings.

To attach the 1944 siaone disc to your sander, face your sander upside down and place the surface of the disc on the backing pad and press both surfaces together. Ensure all holes are aligned for extraction. Peel back whenever you want to change the disc.

AFTER CARE

Please dispose of the abrasive material correctly. Please seek local advice for dealing with this material.

OTHER

It is important to understand when using abrasives to check whether your full system is suitable for the task in hand. We are able to advise you on sanding equipment and materials to achieve the perfect finish. Please click the contact us button for advice.