SIA 1950 SIASPEED 70MM x 125MM STRIPS

siaspeed strips for a perfect finish at full speed

Product Ref: 6783.9190.0040 | Brand: Sia

0 Reviews

£15.00 exc. VAT

Overview

Sanding is a must-do in any paint or coating project. It is essential for giving your work an amazing smooth finish. To make sanding faster and effortless, we recommend power tools over manual sanding. Orbital Sanding is highly recommended for aggressive sanding due to its proclivity for removing a lot of material.

Choosing the correct abrasive for the job is also important.

1950 siaspeed is the versatile all-round product and is specially designed for high stock removal rates, perfect surface quality and long life in applications such as the surface treatment of body filler, primer filler, lacquers and paints.

Advantages

Very high abrasive performance with a good finish
Performance-enhancing grit mix with ceramic corundum in 40 - 80 grit range
Minimal clogging thanks to open coating in 220 - 600 grit range
Extremely long lifetime
Lower abrasive consumption
Versatile all-round product with an attractive range of options

Applications

Sanding off coatings and impurities

Sanding out unevenness at the edges of repaired surfaces

Flatting bodyfiller and composite materials

Fine sanding primer filler

Keying old and new lacquers

Materials

Colour

Primer filler

Putty

Paints

Old lacquer

Primer coat

Epoxy primer coat

Cathodic dip primer coat

Plastics

Acrylic glas

Gelcoat polyester

Glass-fibre reinforced plastic (GRP)

Technical Info

Grit Type:	Blue-fired/white aluminium oxide
Grit Range:	80-240; 320; 400-600
Backing:	Knitted fabric
Coating:	Electrostatic
Bonding:	Resin over resin

Usage

PREPARATION

Ensure you have the correct PPE for sanding. We recommend disposable FFP2 Face Masks, as they provide optimum protection from airborne particles such as dust, mist and fumes. FFP2 Masks are suitable for plastering and sanding. Wear eye protections such as safety glasses and goggles to prevent flying debris from sanding. Wear Safety Gloves when using power tools such as sanders and grinders.

Ensure you have the correct backing pad for the Sianet sanding strip.

APPLICATION

Sianet strips are hook and loop and have abrasive-material backing similar to Velcro. The backing pads have microscopic hooks on their surface, while the hook and loop discs have corresponding tiny loops on their backings.

To attach the Sianet strip to your sander, face your sander upside down and place the surface of the disc on the backing pad and press both surfaces together. Ensure all holes are aligned for extraction. Peel back whenever you want to change the strip.

AFTER CARE

Please dispose of the abrasive material correctly. Please seek local advice for dealing with this material.

OTHER

It is important to understand when using abrasives to check whether your full system is suitable for the task in hand. We are able to advise you on sanding equipment and materials to achieve the perfect finish. Please click the contact us button for advice.