• Free Next Day Delivery

    On selected products ordered before 3pm

  • Click and Collect

    Available within one hour on selected products

  • Best Prices

    We'll Beat any Online Trade Prices

  • Fast & Free Technical Advice

    For technical advice call 07583672586

SIKKENS CETOL® WP 566 TRANSLUCENT BASE STAIN

SIKKENS CETOL® WP 566 TRANSLUCENT BASE STAIN

Product Ref: 5048-008001-70 | Brand: Sikkens

0 Reviews

£114.33 exc. VAT

  • Estimated delivery within 5-7 days
    Please note: Delivery times provided are estimates and not guaranteed. If delivery is expected to take longer than 10 working days after placing your order, one of the team will attempt to contact you. For more detailed delivery times, please contact the office on 03333 208 583.

Overview

Sikkens Cetol WP 566 is a waterborne, pigmented translucent dipping, flow-coating, brushing machine and vacuum coater primer for exterior wooden components. Primers are the connection between wooden surfaces and coatings. Their composition influences way the final coats perform, so it's vitally important to choose the correct primer for the job you are doing.

This base coat for exterior wooden components can be tinted to any colour from the Joinery Color Classics or Never Ending Impressions collections with lightfast, weather resistant translucent pigments. The optical impression of the individual translucent colours on different substrates and with different layer thicknesses is different; therefore, sample coatings on the substrate prior to use. Medium to highly pigmented translucent colours are more weather-resistant than low-pigmented colours. Colourless coatings are not suitable for outdoor use. It also displays deep penetration, good run-off and colouring properties.

It can be deluged using Dipping, Flow Coating, Brushing Machine or Vacuum Coater onto a variety of stable wooden components like Windows, Outer Doors, Conservatories and semi-stable wooden components like Rafters, Gates, Shutters and Posts.

FEATURES

  • Ready For Use
  • Weather Resistant
  • Good Run Off Properties
  • Available in Joinery Colour Classics
  • Good UV Protection

 

Application:

Dipping, Flow Coating, Brushing Machine or Vacuum Coater

Coverage:

50 - 160 ml/m², depending on application method, type and absorption properties of wood (exact values must be established through a sample)

Number of Coats:

2 Coats as part of a system

Drying Times:

 

Touch dry in 30 minutes, dry to handle in 4-6 hours @ 23°C

Technical Info

Solids:

39 ± 2

Gravity (kg/l):

1,000 ± 0,030

Viscosity @ 23°C:

22 - 26 SEK

VOC Content:

79 g/l

Usage

PREPARATION

Denib the surface using 240-320 grit stearate abrasives. They provide a higher efficiency than conventional abrasives. Ensure the surface is completely clean of dust and debris before coating.

APPLICATION

Ideally apply by Dipping, Flow Coating, Brushing Machine or Vacuum Coater. Deluge spray and brushing is possible.

AFTER CARE

After 4 Hours of drying, lightly denib if required. Apply Kodrin WV 456 End Grain Sealer as appropriate. It applys white but dries clear. Apply Kodrin V Joint Sealer as appropriate. Apply a thin layer as it is a sealer not a filler. Available as a cartridge, Kodrin WV 472 or as a bottle, Kodrin WV 457. Please see our categories on Sealants, End Grain Sealers and Fillers for further advice.

Apply two coats (Mid Coat and Topcoat) of Cetol WF 960 (Mid Sheen), Cetol WF 965 (Higher Sheen) or Cetol WF 945 (Lower Sheen). All options are Tintable to create more intense shades.

Due to the high chemical resistance of Waterbased Topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or Pluriball are not suitable.

ALTERNATIVE HARDENERS/THINNERS

N/A

OTHER

It is important to understand when using a Waterbased Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.

Reviews

Review this product

Wish List

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

Website Under Maintenance

Website Under Maintenance

Our website is currently under maintenance but our team are still here for you. For placing orders, up to date pricing and customer support, please call 03333 208 583 or email hello@industrialwoodcoatings.co.uk.

Contact Us