SAYERLACK TH0775 PU Hardener
- Prices range from
£25.80 - £97.50
High Build and Ideal for Flat Parts & Doors
Product Ref: TU0001/00-6 | Brand: Sayerlack
£47.94 inc. VAT RRP £52.24
Sayerlack’s TU0001/00 is the perfect general-purpose basecoat for you. It is very fast drying, high build, excellent sandability, extremely fast curing and excellent lift resistance for use on fibreboard and solid wood. It is perfect for doors, flat parts and fitted furniture. Apply by spray gun or curtain coating. Activation with TH0775/00 and thinning with DT1150/00.
Conventional Spray with 1.8mm Tip, Air Mix Spray, Airless Spray or Curtain Coater
Number of Coats:
Drying Times @ 20°C
Minimum 16 Hours
Minimum 16 Hours with PU Topcoats
48 ± 1
0,980 ± 0,030
Viscosity @ 20°C:
Part A: 60” ± 5” (DIN 4)
A+B: 20” ± 3” (DIN 4)
For best results, we suggest preparing the surface using 240-320 grit stearate abrasives as they provide a higher efficiency than conventional. Ensure the surface is completely clean of dust and debris before coating.
With good drying conditions and air circulation (20°C), a good build can be achieved with three coats of 180 g/m² with an interval of 60 minutes in between. Under these circumstances, the substrate can be sanded after 16 hours. Lower temperatures and higher relative humidity can lead to longer drying times, but it is possible to speed up drying using heated ovens.
Sayerlack TU0001/00 Clear PU Basecoat can be over coated with any Clear PU Topcoats such as Sayerlack TZ36**/XX.
Sayerlack TH0755/00 @ 50% is a hardener without St. Andrews Cross.
Sayerlack TH0805/00 @ 50% for lower build and longer drying times.
Sayerlack DT1146/00 Slow Thinner for summer months.
It is important to understand when using a Polyurethane Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.