SAYERLACK TLL3097/XX HIGH GLOSS PIGMENTED PU TOPCOAT

An Ultra High Gloss Topcoat Available in any Colour

Product Ref: TLL3097/BB-3.8 | Brand: Sayerlack

Prices Range From £67.14 - £67.14£67.14 inc. VAT RRP £66.32

Overview

If you are looking for an ultra-high gloss Pigmented Two-Pack Polyurethane Topcoat, TLL3097 is for you. It has a 97% Gloss Sheen and is available in any opaque colour you desire. It offers a superb surface finish after a slower drying time and designed to allow for further burnishing after 3 days to achieve a full wet look. Suitable for use on fibreboard and solid wood, it is perfect for furniture, flat parts and profiles. Apply by spray gun or curtain coating. Activation with standard Part B TH0735/00 or faster drying Part B TH0724/00 and thinning with DT0424/00.

FEATURES

Wet Look Gloss
Apply by spray gun or curtain coater
Superb Elasticity
Good pot life

Mixing Procedure: Part A Part B Thinner	Weight (Kg) TLL3097/XX 100 TH0735/00 70 DT0424/00 30
Application:	Conventional Spray with 1.8mm Tip or Curtain Coater
Coverage:	Maximum 80-200g/m²
Number of Coats:	1
Drying Times @ 20°C Dust Free Touch Dry	30 Minutes 6 Hours
Pot Life:	4 Hours

Technical Info

Solids:	74 ± 2
Gravity (kg/l):	1,367 ± 0,030
Viscosity @ 20°C:	180” ± 5” (DIN 4)
VOC Content:	345 g/l

Usage

PREPARATION

For best results, we suggest priming the surface with a pigmented Polyester Basecoat, as they are less prone to lifting than Polyurethane Primers. Once fully cured denib the surface using 240-320 grit stearate abrasives. They provide a higher efficiency than conventional abrasives. Ensure the surface is completely clean of dust and debris before coating.

APPLICATION

With good drying conditions and air circulation (20°C), achieve a good build with one coats of 80-200 g/m². Under these circumstances, the substrate can be dry to the touch in 6 hours. Lower temperatures and higher relative humidity can lead to longer drying times.

AFTER CARE

Due to the high chemical resistance of Polyurethane Topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or Pluriball are not suitable.

ALTERNATIVE HARDENERS/THINNERS

Sayerlack TH0724/00 @ 100% for faster drying. It will result in reduced hiding power.

OTHER

It is important to understand when using a Polyurethane Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.