SAYERLACK XA4080/00 Waterbased Crosslinker
- £115.14RRP £124.51
Hydroplus Clear Coat on Coat Waterbased Lacquer
Product Ref: AFL3110/00-25 | Brand: Sayerlack
£228.00 inc. VAT RRP £245.08
Beautiful stylish results are important when coating furniture. The Sayerlack Hydroplus water-based range can be used to produce finishes that are indistinguishable in quality, strength and chemical resistance as two-pack polyurethane finishes. Sayerlack is at the forefront of water-based technology that is conscientious about the wellbeing of people and the environment. AFL31 is a range of one-pack, waterborne, self-sealing lacquers designed for interior joinery on doors and other substrates ensuring good hardness, transparency and smoothness to the touch.
Its has a high transparency, vertical hold and excellent sanding and is the ideal product for doors and vertical wooden components. It can be sprayed using a conventional gun, airmix system, airless system and electrostatic spray guns and can be used as a self-sealer or as a topcoat underneath one of the basecoats from the Hydroplus range. Ready for use, it can be crosslinked with 1% of XA4080 for a more durable chemical resistant finish and thinned using water if necessary.
Conventional Spray, Air Mix Spray, Airless Spray, Electrostatic Spray
Number of Coats:
Drying Times @ 20°C
38 ± 2
1,046 ± 0,030
Viscosity @ 20°C:
100” ± 5” (DIN 4 at 20°C)
We suggest 240-280 grit sand papers for sanding the first coat. For best results, use stearate sandpaper, which provide much higher efficiency than conventional sand paper. Please see our SIA Abrasives pages for specific papers for waterborne products.
AFL31 can be applied alone or as a topcoat on the waterbourne basecoats for interiors from the Sayerlack Hydroplus range. Due to the way the material is formulated it is stackable after 60 minutes from an application of 100g/m, in good drying conditions and with air circulation (at 20°C and with 65% of relative humidity). Under these circumstances, it is sandable after 25 minutes. Lower temperatures and higher relative humidity will incur a longer drying time.
Due to the high chemical resistance of Waterbased Topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or Pluriball are not suitable.
When used for industrial coating systems, we suggest the use of the hardener and the addition of 1% of XA4080/00 to speed up stacking times.
It is important to understand when using a Waterbased Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.