SAYERLACK AU0406/13 WHITE WATERBASED PRIMER

The Waterborne White Primer for MDF Flat Parts, Frames & Doors

Product Ref: AU0406/13-6 | Brand: Sayerlack

£42.66 inc. VAT RRP £46.06

Overview

Beautiful stylish results are important when coating furniture. The Sayerlack Hydroplus water-based range can be used to produce finishes that are indistinguishable in quality, strength and chemical resistance as two-pack polyurethane finishes. Sayerlack is at the forefront of water-based technology that is conscientious about the wellbeing of people and the environment. AU0406/13 is a one-pack, waterborne, white primer designed for interior joinery onto MDF and Masonite substrates such as Flat Surfaces, Frames, Baseboards and Doors.

Its has a high pigment and solids content, excellent filling properties, ensures a consistent colour even at high film thicknesses. It's the ideal product for all MDF and Masonite substrates with a flat geometry such as Doors, Baseboards and Frames. It can be sprayed using a conventional gun, airmix system and airless system. It is fast drying and a smooth finish can be achieved in two coats and if a higher build is required, a third coat can be applied. It comes ready to use and can be thinned using water if necessary.

FEATURES

Ideal for use on MDF & Masonite
High solids
Superb filling power
Fast Drying
Can be used under Sayerlack Hydroplus Pigmented Topcoats

Application:	Conventional Spray, Air Mix Spray, or Airless Spray
Coverage:	80 - 200g/m²
Number of Coats:	Maximum 3
Drying Times @ 20°C Dust Free Touch Dry Stackable	30 Minutes 2 Hours 12 Hours
Sanding:	Minimum 4 Hours
Overcoating:	Minimum 12 Hours

Technical Info

Solids:	58 ± 1
Gravity (kg/l):	1.393 ± 0.030
Viscosity @ 20°C:	70 ± 5 (DIN 4)
VOC Content:	45 g/l

Usage

PREPARATION

For best results, we suggest preparing the surface using 240-320 grit stearate abrasives as they provide a higher efficiency than conventional. Ensure the surface is completely clean of dust and debris before coating.

APPLICATION

Closed pore or semi-closed pore can be achieved with just 2 coats of 80-140 g/m² each with an interval of 2 hours in between, in good drying conditions and with air circulation (at 20°C and with 65% of relative humidity). Under these circumstances, it's sandable after 3-4 hours. Lower temperatures and higher relative humidity will incur a longer drying time. When a higher build is required, a third coat can be applied, but the waiting time is extended to at least 4 hours and sanding can take place after 6-8 hours.

Applicable by spray directly on MDF or Masonite substrates. It has a high pigment and high solids content, thus ensures excellent filling power and even color, even at 100-150 g/m² application due to its excellent wettability. Thanks to its elasticity, drying can take place in the oven (max 180 g/m²) at 40°C with 5m/s forced air. Under these conditions, it achieves touch dry after approximately 8 minutes. It is advisable to use NIR lamps in order to further reduce drying time. At room temperature (20°C, 65% R.U.), touch dry is approximately 25 minutes and sanding can be carried out after at least 60 min.

AFTER CARE

Sayerlack AU0406/13 Primer can be over coated with any pigmented Waterbased Topcoats such as Sayerlack AT99**/XX.

ALTERNATIVE HARDENERS/THINNERS

OTHER

It is important to understand when using a Waterbased Coating to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.