WAGNER SPECIAL OFFER PUMP
Tintable Translucent 1K Impregnating Primer with Active Biocidal Ingredients
Product Ref: 5115574-66 | Brand: Sikkens
£14.64 inc. VAT RRP £242.35
Sikkens Cetol WP 567 BPD is a deep penetrating waterborne, pigmented translucent dipping, flow-coating, brushing machine and vacuum coater impregnating primer for exterior wooden components. It contains protection against blue stain. Primers are the connection between wooden surfaces and coatings. Their composition influences way the final coats perform, so it is vitally important to choose the correct primer for the job you are doing.
This base coat for exterior wooden components can be tinted to any colour from the Joinery Color Classics or Never Ending Impressions collections with lightfast, weather resistant translucent pigments. The optical impression of the individual translucent colours on different substrates and with different layer thicknesses is different; therefore, sample coatings on the substrate prior to use. Medium to highly pigmented translucent colours are more weather-resistant than low-pigmented colours. Colourless coatings are not suitable for outdoor use. It also displays deep penetration, good run-off and colouring properties.
It can be deluged using Dipping, Flow Coating, Brushing Machine or Vacuum Coater onto a variety of stable wooden components like Windows, Outer Doors, Conservatories and semi-stable wooden components like Rafters, Gates, Shutters and Posts.
Dipping, Flow Coating, Brushing Machine or Vacuum Coater
50 - 160 ml/m², depending on application method, type and absorption properties of wood (exact values must be established by tests).
Number of Coats:
2 Coats as part of a system
Touch dry in 30 minutes, dry to handle in 4-6 hours @ 23°C
39 ± 2
1,000 ± 0,030
Viscosity @ 23°C:
22 - 26 SEK
Denib the surface using 240-320 grit stearate abrasives. They provide a higher efficiency than conventional abrasives. Ensure the surface is completely clean of dust and debris before coating.
Ideally apply by Dipping, Flow Coating, Brushing Machine or Vacuum Coater. Deluge spray and brushing is possible.
After 4 Hours of drying, lightly denib if required. Apply Kodrin WV 456 End Grain Sealer as appropriate. It applys white but dries clear. Apply Kodrin V Joint Sealer as appropriate. Apply a thin layer as it is a sealer not a filler. Available as a cartridge, Kodrin WV 472 or as a bottle, Kodrin WV 457. Please see our categories on Sealants, End Grain Sealers and Fillers for further advice.
Apply two coats (Mid Coat and Topcoat) of Cetol WF 960 (Mid Sheen), Cetol WF 965 (Higher Sheen) or Cetol WF 945 (Lower Sheen). All options are Tintable to create more intense shades.
Due to the high chemical resistance of Waterbased Topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or Pluriball are not suitable.
It is important to understand when using a Waterbased Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.