SAYERLACK TZ99**/XX PIGMENTED PU TOPCOAT

SAYERLACK TZ99 PIGMENTED PU TOPCOAT

Quick Drying, High Solids and Available in any Colour and Sheen

Product Ref: TZ9910/BB-3.8 | Brand: Sheruk

0 Reviews

Prices Range From £44.00 - £225.78£44.00 exc. VAT

Overview

If you are looking for a high opacity Pigmented Two-Pack Polyurethane Topcoat, TZ99 is for you. It is available in any colour you desire in Matt, Semi-Matt, Satin and Gloss. It offers very good elasticity, UV stability, high build qualities, superb surface feel and an extremely fast curing time. Suitable for use on fibreboard and solid wood, it is perfect for furniture, flat parts and profiles. Apply by spray gun or curtain coating. Activation with TH0720/00 and thinning with DT1150/00.

FEATURES

Dries in 20 minutes
Apply by spray gun or curtain coater
High Solids
Chemical Agent Resistance
Superb Elasticity
Long pot life

Mixing Procedure: Part A Part B Thinner	Weight (Kg) TZ99xx/XX 100 TH0720/00 50 DT1150/00 20-30
Application:	Conventional Spray with 1.8mm Tip, Air Mix Spray, Airless Spray or Curtain Coater
Coverage:	Maximum 80-150g/m²
Number of Coats:	1
Drying Times @ 20°C Dust Free Touch Dry	10 Minutes 30-40 Minutes
Pot Life:	3-4 Hours

Technical Info

Solids:	65 ± 2
Gravity (kg/l):	1,310 ± 0,030
Viscosity @ 20°C:	Part A: 35” ± 5” (DIN 6)
VOC Content:	443 g/l

Usage

PREPARATION

For best results, we suggest priming the surface with two to three coats of Sayerlack TU0148/00 White PU Primer. Once fully cured denib the surface using 240-320 grit stearate abrasives. They provide a higher efficiency than conventional abrasives. Ensure the surface is completely clean of dust and debris before coating.

APPLICATION

With good drying conditions and air circulation (20°C), achieve a good build with one coats of 80-150 g/m². Under these circumstances, the substrate can be dry to the touch in 30-40 minutes. Lower temperatures and higher relative humidity can lead to longer drying times, but it is possible to speed up drying using heated ovens.

AFTER CARE

Due to the high chemical resistance of Polyurethane Topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or Pluriball are not suitable.

ALTERNATIVE HARDENERS/THINNERS

Sayerlack TH0755/00 @ 50% for faster drying of intense colour shades.

Sayerlack DT0040/00 Thinner

OTHER

It is important to understand when using a Polyurethane Coatings to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.