• Free Next Day Delivery

    On selected products ordered before 3pm

  • Click and Collect

    Available within one hour on selected products

  • Best Prices

    We'll Beat any Online Trade Prices

  • Fast & Free Technical Advice

    For technical advice call 07583672586

SOPUR HARMONY DYE STAINS

SOPUR HARMONY DYE STAINS

Good fluidity, consistent colour and speed of drying

Product Ref: HARMONY-21-57/2 | Brand: Sopur

0 Reviews

£21.41 exc. VAT

  • Estimated delivery within 5-7 days
    Please note: Delivery times provided are estimates and not guaranteed. If delivery is expected to take longer than 10 working days after placing your order, one of the team will attempt to contact you. For more detailed delivery times, please contact the office on 03333 208 583.

Overview

Striking elegant results are important when coating furniture. The Sopur Harmony Dye Stain range can be used to produce finishes that are distinguishable in quality, strength and chemical resistance as rival stains. Sopur is at the forefront of wood stain technology and their dye stains are perfect for interior joinery underneath clear Acrylic or Polyurethane Topcoats..

Harmony Dye Stains have been designed using organic solvents, dyes and pigments for good fluidity, consistent colour and rapid drying. They are perfect on Oak, Ash and Pine for accentuating and enhancing the wood’s natural grain, producing stunning rustic effects.

FEATURES

  • Good Fluidity
  • Consistent Colour
  • Rapid Drying
  • Perfect for Oak, Ash and Pine
  • Enhances woods grain

 

Mixing Procedure:

Ready for use

Application:

Conventional Spray and wipe, brush, rag apply

Coverage:

10 – 15 m²/L

Number of Coats:

1

Drying Times @ 20°C

Dust Free

 

15 Minutes

Overcoating:

15 Minutes

Technical Info

Density (g/cm³):

0.86

Viscosity @ 20°C:

approx. 10 (Ford cup 4)

VOC Content:

770 g/l

Usage

PREPARATION

Sand the timber with 180 – 240 grit paper (depending on species). Ideally air blow debris off the surface and wipe clean with a white cotton cloth. Stir thoroughly to agitate residue in the bottom of the tin. Trial the stain and subsequent clear lacquer on an off-cut of the same timber substrate to establish the colour is suitable.

APPLICATION

The application of Harmony Solvent Stains enhances the grain structure and balances the natural colour differences out. They can be applied by wiping on and off using a rag, spraying or brushing. If spraying we recommend using a spray gun (pressure/suction/gravity) with 1.4 mm to 1.8 mm tip. If fine staining use a spray gun with 1.0 or 1.2 mm tip. Spray application is ideal because of its penetration rate and the quick drying nature of stains. If brushing we recommend a good quality synthetic brush for an ultra-smooth finish. If rag applying always use a white cotton cloth as opposed to coloured to ensure dyes from the fabric do not contaminate the staining.

AFTER CARE

The stained wood can be finished by spray with any kind of varnish or oil, purposed for wooden surfaces. Application should always be done in accordance with the manufacturer’s instructions. In order to prolong the durability of colour we recommend to use the varnish with high resistance to UV.

OTHER

It is important to understand when using a Wood Stain to check whether your full system is appropriate. IWC are able to advise you on spray equipment and materials to achieve the perfect finish. Please click the contact us button for advice.

Reviews

Review this product

Wish List

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

Website Under Maintenance

Website Under Maintenance

Our website is currently under maintenance but our team are still here for you. For placing orders, up to date pricing and customer support, please call 03333 208 583 or email hello@industrialwoodcoatings.co.uk.

Contact Us